Generally Der Yiing Plastic delivers custom packaging solution in about 4-6 weeks from the point of artwork approval by the customer. It also depends on the film whether we have in stock. It will be faster...

MOQ is determined from the amount of packages that can be produced from a printing roll of film. This is dependent on the size and style of the package made. Please feel free to contact with us for the MOQ for each...

Most of the printing is done from 1 to 8 colors (including C, M, Y, K). We also produce according to customers needs. Please feel free to contact with us if you need customized printing colors.

Plate charge generally cost in the range of $150 to $250 each depend to the design size. It depends on the colors of customers' needs. Please feel free to contact with us if you have any questions.

Printing is done when the packaging film is still in a roll stock format. Therefore any printing on bags & pouches is considered to be a tailored printed project.

All of the packaging film supplies are food safe materials/products comply with FDA or SGS cerificated. Please feel free to let us know if you need any other certificates of food according to your country's...

Biaxially stretched polypropylene film (BOPP film) products. Its uses are as follows: (1) Plain film: It has the advantages of good transparency and high gloss. It can be used after processing such as gluing,...

Moisture vapor transmission rate is the rate at which water vapor will permeate through a film at specific conditions. It is measured in units of g/m²/24 hr inASTM F 1249 37.8°C. 90%RH.

Oxygen transmission rate is the rate at which oxygen permeates through a film at specific temperature and relative humidity conditions. It is measured in units of cm²/m² 24 hr in the ASTM D 3985...

Slip properties performance on packaging lines to ensure low COF which helps for proper speed packaging machines for better productivity. When COF is too high or too low, the film will not run as it should....

PE PCR film formulated with post-consumer resin (PCR). The film structures, which incorporate post-consumer low-density and linear low-density polyethylene (rLDPE/LLDPE), can be tailored to meet the demands...