Product Introduction

The film can cover a surface during processing, handling or storage. Substrate material, surface texture and application time affect the suitable adhesion and removal conditions.

Features

• Test methods: 1. Bond to an acrylic panel; peel speed 300 mm/min, peel angle 90°, dwell time 20–40 minutes. 2. Tensile speed 300 mm/min; measure strength and elongation at break.
• Recommended storage and use conditions: 23±2°C and 65±5% RH.
• Quality guarantee: six months after purchase, for film stored in roll form only. The guarantee does not apply under direct sunlight, temperatures above 40°C or below 0°C, or humidity above 70% RH.

Specification

• Thickness: 40–80µ
• Adhesion: 1–50 g/25 mm (±3 g)
• Width: 20–1600 mm
• Length: standard 200–1000 m
• Color: clear or blue; green available to order

Applications

• Protection during processing and shipment of ordinary and tempered glass.
• Protection during LCD assembly, transport and storage against electrostatic damage.
• Light guide plate production and diffusion-film die cutting.
• Surface and transport protection for glossy PC, PET and PMMA panels.