Product Introduction

This PE protective film can be selected for temporary coverage of wafers or metal sheets during processing. Adhesive system, tack and removal condition should suit the actual surface and production steps.

Features

• Corresponds directly to Nitto N830.
• Japanese-imported PE base film and an exclusively developed Japanese adhesive formulation.
• Stable adhesion without adhesive residue.
• Good substrate extensibility.
• Low gel and fisheye levels.
• Meets RoHS 2.0 restricted-substance requirements.

Applications

• Protection during wafer dicing.
• Protective film for PCBs and flexible printed circuits.

Features

• Good self-exhausting performance
• No glue residue after peeling

• 1. Adhesive acrylic sheet, stretching speed 300 mm/min, peeling angle 90 degrees, residence time 20-40 minutes
• 2. The tensile speed is 300 mm/min, the strength and elongation at break

Best storage conditions and use environment

Temperature 23±2 (℃), humidity 65%±5%

Quality guarantee period

Within 6 months after the product is purchased, only film rolls can be used. Such as direct sunlight, high temperature (above 40°C), high humidity (above 70% RH), low temperature (below 0°C), etc., there is no guarantee for 6 months.

Application

• For ordinary glass and tempered glass processing and shipping protection.
• LCD assembly, transportation, storage protection, to prevent LCD from being broken down by static electricity.
• For the protection of light guide plate production, and for the protection of diffusion film cutting and punching.
• PC, PET, PMMA smooth sheet surface protection, product transportation process protection.

Specification

• Product thickness: 40~80µ
• Adhesion: 1～50g / 25mm (±3g)
• Width: 20mm~1600mm
• Length: Normal 200m~1000m
• Color: transparent/blue (green can be customized)